SECTION OP-56: TAIL LIGHTING

From RV10 Community Wiki
Revision as of 05:16, 12 June 2022 by Martin (talk | contribs)
Jump to navigation Jump to search

Build Instruction Updates

Hints

  • The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:

    Photo by J. Tremble
  • See also discussions
  • A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail or on each wing tip.
Retrieved from "https://rv10.org/index.php?title=SECTION_OP-56:_TAIL_LIGHTING&oldid=858"