SECTION 27: FIREWALL

PAGE 27-2

• For additional info, see also section QB_Fuselage
• Plan your control cables pass-throughs at step 3
• Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.
  Many use these for the control cable penetrations (at Spruce: EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP):
  
• Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:
  
• Many people have used the following pass-thru with the RV-10 (at Spruce: Avery SS Firewall Pass-Thru):