Avionics / Panel

From RV10 Community Wiki
Revision as of 19:02, 21 March 2022 by Martin (talk | contribs) (Created page with "== Do's and Don'ts == * Don't remove any material from the ribs supporting the glare shield. You need to place the instruments so that they go left, right or underneath the ribs. * Don't remove the lowest part of the sub-panel to accommodate GPS units (the bottom part with its flange is structural). Rather cut a rectangular hole for the GPS with rounded edges to avoid stress into the sub-panel and reinforce the cut-out with angle brackets as mentioned in the build manual.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Do's and Don'ts

  • Don't remove any material from the ribs supporting the glare shield. You need to place the instruments so that they go left, right or underneath the ribs.
  • Don't remove the lowest part of the sub-panel to accommodate GPS units (the bottom part with its flange is structural). Rather cut a rectangular hole for the GPS with rounded edges to avoid stress into the sub-panel and reinforce the cut-out with angle brackets as mentioned in the build manual.
Retrieved from "https://rv10.org/index.php?title=Avionics_/_Panel&oldid=62"