SECTION 40: FLAP SYSTEM

Build Instruction Updates

• 11/05/2022 40_10.pdf

Check for more recent updates here

Flap Position Sensor

• The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS12 sensor (available at Vans) to interface to either the VPX or the GAD27. The flap position option from Vans for the RV-10 is not compatible with modern panels as it has no potentiometer to reflect the position. Check out the POS12 installation instructions for the RV-14, for example N398WM build log.