3,777
edits
Avionics / Panel: Difference between revisions
Created page with "== Do's and Don'ts == * Don't remove any material from the ribs supporting the glare shield. You need to place the instruments so that they go left, right or underneath the ribs. * Don't remove the lowest part of the sub-panel to accommodate GPS units (the bottom part with its flange is structural). Rather cut a rectangular hole for the GPS with rounded edges to avoid stress into the sub-panel and reinforce the cut-out with angle brackets as mentioned in the build manual."
(Created page with "== Do's and Don'ts == * Don't remove any material from the ribs supporting the glare shield. You need to place the instruments so that they go left, right or underneath the ribs. * Don't remove the lowest part of the sub-panel to accommodate GPS units (the bottom part with its flange is structural). Rather cut a rectangular hole for the GPS with rounded edges to avoid stress into the sub-panel and reinforce the cut-out with angle brackets as mentioned in the build manual.") |
(No difference)
|