SECTION 18: FUEL TANK: Difference between revisions

SECTION 18: FUEL TANK (view source)

60 bytes added , 9 December 2024

m

3,777

edits

@@ Line 17: / Line 17: @@
 ==== Page 18-5 ====
-* Figure 3, the rivet diagram, has a hole with no rivet callout. It's near the bottom of the diagram, roughly in the middle. This hole is only on the bottom side to get the rear baffle oriented correctly. The flange angles are not the same for upper and lower side. See this [https://www.facebook.com/groups/vansrv10/posts/8695012687286420 FB post for details]. See also this [https://vansairforce.net/threads/three-holes-in-t-1002.30132/#post-1629687 VAF post for details]. See also this [https://vansairforce.net/threads/fuel-tank-mystery-hole.121986/#post-995109 VAF thread] for details.
+* Figure 3, the rivet diagram, has a hole with no rivet callout. It's near the bottom of the diagram, roughly in the middle. This hole is only on the bottom side to get the rear baffle oriented correctly. The flange angles are not the same for upper and lower side. Use the same rivet as for the neighbor ones (AN426AD3-3.5). See this [https://www.facebook.com/groups/vansrv10/posts/8695012687286420 FB post for details]. See also this [https://vansairforce.net/threads/three-holes-in-t-1002.30132/#post-1629687 VAF post for details]. See also this [https://vansairforce.net/threads/fuel-tank-mystery-hole.121986/#post-995109 VAF thread] for details.
 ==== Page 18-6 ====