3,777
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
m
→29-14
m (→29-13) |
m (→29-14) |
||
| Line 44: | Line 44: | ||
Use the same technique as described above. | Use the same technique as described above. | ||
Match-Drill #30 the remaining holes aft of the firewall brackets common to the firewall upper angle and the upper fuse channels. Remove the cleco from the aft most hole common to these two parts and final-drill the hole #30 on both sides of the aircraft. | Match-Drill #30 the remaining holes aft of the firewall brackets common to the firewall upper angle and the upper fuse channels. Remove the cleco from the aft most hole common to these two parts and final-drill the hole #30 on both sides of the aircraft. | ||
Step 6: | Step 6: | ||
Match-drill #30 the holes along the upper and lower flanges of the F-1041-L and -R Lwr Fuse Channels into the WD-1003-L-PC and -R-PC Lower Firewall Brackets. | Match-drill #30 the holes along the upper and lower flanges of the F-1041-L and -R Lwr Fuse Channels into the WD-1003-L-PC and -R-PC Lower Firewall Brackets. | ||