3,777
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
m
→29-14
m (→29-13) |
m (→29-14) |
||
| Line 35: | Line 35: | ||
Match-Drill #30 the holes in the lower flange of the F-1040-L and -R Upper Fuse Channels into the WD-1002-L and -R Upper Firewall Brackets. | Match-Drill #30 the holes in the lower flange of the F-1040-L and -R Upper Fuse Channels into the WD-1002-L and -R Upper Firewall Brackets. | ||
Mark the edge distance of 1/8” on the outside of the Upper Firewall Bracket with a Sharpie. | Mark the edge distance of 1/8” on the outside of the Upper Firewall Bracket with a Sharpie. | ||
Image5<br> | [[File:Image5.jpg]]<br> | ||
Use a small block of wood to hold the flange on the Upper Firewall bracket tight against the Upper Fuse Channel. Use a small metal plate between the clamp and the upper and lower flange of the Upper Firewall Bracket to push the flanges in. | Use a small block of wood to hold the flange on the Upper Firewall bracket tight against the Upper Fuse Channel. Use a small metal plate between the clamp and the upper and lower flange of the Upper Firewall Bracket to push the flanges in. | ||
Image6<br> | [[File:Image6.jpg]]<br> | ||
Make sure that you cannot see the edge distance lines through the holes of the lower flange of the Upper Fuse Channel. Match-Drill #30 the holes. Cleco as you go. | Make sure that you cannot see the edge distance lines through the holes of the lower flange of the Upper Fuse Channel. Match-Drill #30 the holes. Cleco as you go. | ||
| Line 50: | Line 50: | ||
Mark the edge distance of 1/8” on the outside of the Lower Firewall Bracket with a sharpie. | Mark the edge distance of 1/8” on the outside of the Lower Firewall Bracket with a sharpie. | ||
Use a small block of wood to hold the flange on the Lower Firewall Bracket tight against the Lwr Fuse Channel. Use a small metal plate between the clamp and the upper and lower flange of the Lower Firewall Bracket to push the flanges in. | Use a small block of wood to hold the flange on the Lower Firewall Bracket tight against the Lwr Fuse Channel. Use a small metal plate between the clamp and the upper and lower flange of the Lower Firewall Bracket to push the flanges in. | ||
Image7<br> | [[File:Image7.jpg]]<br> | ||
Make sure that you cannot see the edge distance lines through the holes of the upper or lower flange of the Lwr Fuse Channel. Match-Drill #30 the holes. Cleco as you go. | Make sure that you cannot see the edge distance lines through the holes of the upper or lower flange of the Lwr Fuse Channel. Match-Drill #30 the holes. Cleco as you go. | ||