3,777
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
m
→29-13
m (→29-13) |
m (→29-13) |
||
| Line 13: | Line 13: | ||
Match-Drill #40 the holes in the F-01069-L-1 & -R-1 Fwd Side Skins and the F-1040-L and -R Upper Fuse Channels common to the WD-1002-L and -R Upper Firewall Brackets. | Match-Drill #40 the holes in the F-01069-L-1 & -R-1 Fwd Side Skins and the F-1040-L and -R Upper Fuse Channels common to the WD-1002-L and -R Upper Firewall Brackets. | ||
Mark the edge distance of 1/8” on the outside of the Upper Firewall Bracket with a Sharpie. | Mark the edge distance of 1/8” on the outside of the Upper Firewall Bracket with a Sharpie. | ||
[[File:Image1.jpg]]<br> | |||
Mark the centre of the middle flange of the Upper Firewall Bracket and the Upper Fuse Channel. | Mark the centre of the middle flange of the Upper Firewall Bracket and the Upper Fuse Channel. | ||
[[File:Image2.jpg]]<br> | |||
Use a small block of wood to hold the flange on the Upper Firewall Bracket tight against the Upper Fuse Channel. | Use a small block of wood to hold the flange on the Upper Firewall Bracket tight against the Upper Fuse Channel. | ||
[[File:Image3.jpg]]<br> | |||
Make sure the centre lines still align. Also make sure that the edge distance lines cannot be seen through the holes of the Upper Fuse Channel. Match-Drill #40 the holes and cleco as you go. | Make sure the centre lines still align. Also make sure that the edge distance lines cannot be seen through the holes of the Upper Fuse Channel. Match-Drill #40 the holes and cleco as you go. | ||
[[File:Image4.jpg]]<br> | |||
Match-Drill #40 the holes in the fwd side skins and the F-1041-L and -R Lower Fuse Channels common to the WD-1003-L and -R Lower Firewall Brackets. | Match-Drill #40 the holes in the fwd side skins and the F-1041-L and -R Lower Fuse Channels common to the WD-1003-L and -R Lower Firewall Brackets. | ||