186
edits
SECTION 6: VERTICAL STABILIZER: Difference between revisions
no edit summary
FFooccuuss (talk | contribs) (Added a tip to shorten rivets to ribs/skins that are called out a bit longer than ideal, resulting in shop heads that set to one side.) |
No edit summary |
||
| Line 35: | Line 35: | ||
* AN426AD3-3.5 rivets fastening the skins to the ribs may actually be a bit long for the .050" total skin thickness. (Ideal length would be .191") If you have trouble with these rivets leaning over instead of driving straight, consider taking off .020-.030" or using 3-3's instead. | * AN426AD3-3.5 rivets fastening the skins to the ribs may actually be a bit long for the .050" total skin thickness. (Ideal length would be .191") If you have trouble with these rivets leaning over instead of driving straight, consider taking off .020-.030" or using 3-3's instead. | ||
* Page 6-5, Figure 2: This may be your first time using AN3 bolts. Be sure to refer to the torque specs in Section 5 and consider adding torque seal as well. Torque specs don't apply to the AN509 machine screws, however. | |||
[[index.php?title=Category:Hints]] | [[index.php?title=Category:Hints]] | ||