3,777
edits
SECTION OP-38: ELECTRIC AILERON TRIM: Difference between revisions
SECTION OP-38: ELECTRIC AILERON TRIM (view source)
Revision as of 10:45, 23 November 2023
, 23 November 2023no edit summary
mNo edit summary |
|||
| Line 7: | Line 7: | ||
* "you may need to bend the servo arm slightly to prevent the springs from dragging on the pushrod." | * "you may need to bend the servo arm slightly to prevent the springs from dragging on the pushrod." | ||
* "I attached the springs to the aileron pushrod brackets first. Then, I stretched the springs so that the ends that attach to the servo were together, securing them with a piece of safety wire. Once it was time to attach the servo to the springs, the ends were hooked to the servo arm and the safety wire was removed. It was just there to hold the springs together..." | * "I attached the springs to the aileron pushrod brackets first. Then, I stretched the springs so that the ends that attach to the servo were together, securing them with a piece of safety wire. Once it was time to attach the servo to the springs, the ends were hooked to the servo arm and the safety wire was removed. It was just there to hold the springs together..." | ||
[[Category:Hints]] | |||