3,777
edits
Airflow Systems: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 24: | Line 24: | ||
*#Drill a hole on each side into the evaporator at the top hole of the rear bracket. Put an 8-32 nutsert anchor in, attach the rear bracket and mount the rear bracket on the shelf. | *#Drill a hole on each side into the evaporator at the top hole of the rear bracket. Put an 8-32 nutsert anchor in, attach the rear bracket and mount the rear bracket on the shelf. | ||
*#Make a new front bracket that is 0.675 inches taller<br>[[File:2022-09-18 17-57-55.jpg|400px]] | *#Make a new front bracket that is 0.675 inches taller<br>[[File:2022-09-18 17-57-55.jpg|400px]] | ||
*Don't mount the dryer as shown on the drawings of the manual (half way between evaporator and side skin). It needs to stay clear of the seatbelt shoulder harness that passes through this area. | |||
*One needs a 2.5 inch hole saw to drill the hole for the dryer. Missing in the list of tools needed for installation. | |||
*The manual shows a 90 degree fitting for the dryer with port however the kit contains a 90 degree fitting without a port and a straight hose coupling with port. None of the drawings or pictures show this new variation. | |||
*Note: the dryer comes evacuated so one can't put the fittings on it to find out where to drill the holes into the shelf. No template is provided. | |||