SECTION 34: BAGGAGE DOOR

Build Instruction Updates

• N/A

Check for more recent updates here

Hints

• Ed's video on how to make the door removable
  Note: you will need more hinge pin length than with the stock setup.
• Consider securing the ends of the pins with a safety wire.
  
  Split hinge pin with safety wires.

Page 34-6

• Step 4 - see Door_Locks_/_Hinges_/_Handles for weather strip options.
• Step 5 - You may not be able to reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or use full rivets and a 12 inch back rivet set.