SECTION 29: FUSE SIDE SKINS

From RV10 Community Wiki
Jump to navigation Jump to search

Build Instruction Updates

29-14

  • Step 5
    When match drilling from the F-1001B angle into the WD-1002-L / WD-1002-R firewall steel brackets, be aware that it's easy to violate the edge distance in the steel bracket (2 x D, measured from the center of hole). Remedy is to temporarily install a bolt into the engine mount hole to pull the bracket into place and to use a clamp to move the steel bracket to increase edge distance.
    See also FB post 4/17/2022
Retrieved from "https://rv10.org/index.php?title=SECTION_29:_FUSE_SIDE_SKINS&oldid=872"