SECTION 27: FIREWALL

From RV10 Community Wiki
Revision as of 02:26, 10 May 2022 by Martin (talk | contribs)
Jump to navigation Jump to search

PAGE 27-2

  • For additional info, see also section QB_Fuselage
  • Plan your control cables pass-throughs at step 3
  • Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.
    Many use these for the control cable penetrations (at Spruce: EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP):
  • Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:
  • Many people have used the following pass-thru with the RV-10 (at Spruce: Avery SS Firewall Pass-Thru):
Retrieved from "https://rv10.org/index.php?title=SECTION_27:_FIREWALL&oldid=709"