Tools needed to wire a Garmin panel

From RV10 Community Wiki
Revision as of 16:26, 27 March 2022 by Martin (talk | contribs) (Created page with "* DMC AFM8 Crimp Tool M22520/2-01 * K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) * K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) * Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc * Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red * Pin removal tool high density, e.g. Step N Go, M81969/1-04, green * Hex Allen Tool 3/32, at least 2 3/4 in...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • DMC AFM8 Crimp Tool M22520/2-01
  • K13-1 M22520/2-08 (Positioner for Male and Female normal density pins)
  • K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors)
  • Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc
  • Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red
  • Pin removal tool high density, e.g. Step N Go, M81969/1-04, green
  • Hex Allen Tool 3/32, at least 2 3/4 inches long, e.g. in set of article 5709A38 at https://www.mcmaster.com/
Retrieved from "https://rv10.org/index.php?title=Tools_needed_to_wire_a_Garmin_panel&oldid=368"