SECTION 35: ACCESS COVERS AND FLOOR PANELS

Check for more recent updates here

Step 1 - this step needs to be also done for the Quick Build, it says "Standard Kit" only. The holes are only drilled 1/8th and need to be match drilled to #30. Also the holes on the front that need to be match drilled into the main spar aren't done with the Quick Build.
Step 5 - Figure 2 shows AD470AD4-4 rivets along the outboard foot well rib. There are though two rivets that go through the seat belt attach lugs and they need to be longer. The entire row of rivets along the outboard foot well rib is really hard to buck, see this FB thread for hints.