SECTION 35: ACCESS COVERS AND FLOOR PANELS
Build Instruction Updates
- 04/08/21 35_10.pdf
Check for more recent updates here
Page 35-2
- Step 1 - this step needs to be also done for the Quick Build, it says "Standard Kit" only. The holes are only drilled 1/8th and need to be match drilled to #30. Also the holes on the front that need to be match drilled into the main spar aren't done with the Quick Build.
- Step 5 - Figure 2 shows AD470AD4-4 rivets along the outboard foot well rib. There are though two rivets that go through the seat belt attach lugs and need longer rivets.