Oil Cooler

Larger Oil Cooler

• Airflow Systems 2007X Oil Cooler
• Spacers and bolts
  Note: the kit contains three longer bolts for the upper holes (use thick washers) and three slightly shorter bolts for the lower holes (use thin washers).
• The larger oil cooler is taller. Add an angle bracket to the top for the top line of holes. Enlarge the cut-out of the Van's oil cooler bracket to utilize the topmost part of the oil cooler.
• The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount.
  
• The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount.

Damper

• Airflow Systems Butterfly Valve
• Linear Electric Actuator
• Manual Locking Cable