SECTION 13: MAIN SPAR

From RV10 Community Wiki
Jump to navigation Jump to search

Build Instruction Updates

  • N/A

Check for more recent updates here

Page 13-2

  • Figure 1 shows an "extra" hole on the flange. It is not used anywhere, does not need countersinking.
  • Step 7: Study figure 2 which points out that the long stiffeners align at the outboard end while the short stiffeners align at the inboard end.

Page 13-4

  • Step 4 has you installing AN426AD4-6 rivets, but the rivets are not part of the SB kit (as of 3/2022).
    • Some builders indicate that the rivets are included in the SB kits.
Retrieved from "https://rv10.org/index.php?title=SECTION_13:_MAIN_SPAR&oldid=1725"