Fiberglass / Fairings: Difference between revisions
Jump to navigation
Jump to search
m (→Material List) |
m (→Material List) |
||
| Line 35: | Line 35: | ||
** Spreaders | ** Spreaders | ||
*** [https://www.amazon.com/gp/product/B07XCHZBV5 Set of 9 Body Filler Spreaders] | *** [https://www.amazon.com/gp/product/B07XCHZBV5 Set of 9 Body Filler Spreaders] | ||
** Circular Cutter | |||
*** [https://www.amazon.com/gp/product/B004BP6HOS Fiskars Stick Rotary Cutter, 28mm] | |||
== Hints == | |||
* Make a paper template of the layup and cut the fiberglass an inch larger than the template. Use a large zip lock bag and cut it open. Put your glass and resin (on top of the glass and in the middle) inside. Use a rubber roller from the outside of the bag and spread the resin towards the edges until the fiberglass is all transparent and no excess resin on top of the fiberglass. Put your paper template on top of the bag and cut through the entire stack with a rotary cutter around the paper template. Peel one side of the bag off, install the layup part, peel off the other side of the bag, put peel ply on top and pad it down. | |||
Revision as of 17:56, 6 May 2022
Material List
- Spruce
- Epoxy
- 01-08750 WEST SYSTEM USER MANUAL
- 01-08400 WEST SYSTEM EPOXY KIT B-2 SLOW
- 01-00318 WEST SYSTEM 300 RATIO PUMPS
- Epoxy Thickening
- 01-14800 FLOCKED COTTON FIBER 1 LB.
- 01-04711 CAB-O-SIL 1 GALLON BAG
- 01-14600 3M GLASS BUBBLES 1 LB.
- Fiberglass
- 01-00642 BID FIBERGLASS 38" RA7725/38W F16
- Peel Ply
- 09-15600 SURFACE TAPE DACRON 3" PINKED
- Foam
- 01-01197 H45 PVC FOAM 3/4"X32"X24"
- Utensils
- 01-25800 MIXING STICKS BOX OF 500
- 01-01640 8 OZ MIXING CUP (PKG OF 50)
- Primer
- 09-28280 SMOOTH PRIME QUART
- Epoxy
- Fibreglast (fibreglast has fake high list prices and constantly "sales", so wait for them and take some 15-20% off)
- Amazon
- Sandpaper for Permagrit Blocks
- Rollers
- Spreaders
- Circular Cutter
Hints
- Make a paper template of the layup and cut the fiberglass an inch larger than the template. Use a large zip lock bag and cut it open. Put your glass and resin (on top of the glass and in the middle) inside. Use a rubber roller from the outside of the bag and spread the resin towards the edges until the fiberglass is all transparent and no excess resin on top of the fiberglass. Put your paper template on top of the bag and cut through the entire stack with a rotary cutter around the paper template. Peel one side of the bag off, install the layup part, peel off the other side of the bag, put peel ply on top and pad it down.