3,808
edits
SECTION 31Q: UPPER FORWARD FUSELAGE ASSEMBLY: Difference between revisions
SECTION 31Q: UPPER FORWARD FUSELAGE ASSEMBLY (view source)
Revision as of 15:54, 4 December 2025
, 15:54→Page 31-5
m (→Hints) |
m (→Page 31-5) |
||
| Line 8: | Line 8: | ||
* The control cable bracket underneath the subpanel, F-1083 / F-1083Q, is only needed if your panel has the control knobs or the quadrant mounted right below the panel. If you are using the Aerosport armrest with integrated quadrant, this bracket isn't needed. The QB fuse has it installed. See also this [https://www.facebook.com/groups/vansrv10/posts/8479410405513317 FB Post]. The bracket however can be used to secure supplemental push-pull cables for the heater valves, air filter bypass, parking brake etc. if they are mounted using the stock push-pull cable angle bracket that sits centered underneath the panel. | * The control cable bracket underneath the subpanel, F-1083 / F-1083Q, is only needed if your panel has the control knobs or the quadrant mounted right below the panel. If you are using the Aerosport armrest with integrated quadrant, this bracket isn't needed. The QB fuse has it installed. See also this [https://www.facebook.com/groups/vansrv10/posts/8479410405513317 FB Post]. The bracket however can be used to secure supplemental push-pull cables for the heater valves, air filter bypass, parking brake etc. if they are mounted using the stock push-pull cable angle bracket that sits centered underneath the panel. | ||
== Page 31-2 == | |||
* Figure 3: The figure does not spell out the length of the straight section that gets bent. Consider using the drawing itself as reference when printed in 1:1 scale. See also this [https://www.facebook.com/groups/vansrv10/posts/25082009561493473 FB post]. | |||
== Page 31-5 == | == Page 31-5 == | ||
* Step 3 is not needed if you have a QuickBuild fuselage as the hole in the F-1044B brace is already present and matching the hole in the F-1001B angle. | * Step 3 is not needed if you have a QuickBuild fuselage as the hole in the F-1044B brace is already present and matching the hole in the F-1001B angle. | ||
[[Category:Hints]] | [[Category:Hints]] | ||