3D-Printed Tools and Parts: Difference between revisions
Jump to navigation
Jump to search
(Added additional image for door hinge jig) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
* [https://rv10.ca/3d-printed-stuff Les Kearney's Collection] | * [https://rv10.ca/3d-printed-stuff Les Kearney's Collection] | ||
* [https://airplane.allanglen.com/2023/06/03/wing-conduit-pitot-lines/ Allan's wing conduit and pitot line bracket] | * [https://airplane.allanglen.com/2023/06/03/wing-conduit-pitot-lines/ Allan's wing conduit and pitot line bracket] | ||
** [[ | ** [[Media:Clip1.stl|STL File with pitot]] | ||
** [[ | ** [[Media:Clip2.stl|STL File without pitot]] | ||
* [https://drive.google.com/file/d/124eUTspTteT3eSmWlmUzsF4OzDb2fDbg/view Shawn's wing conduit and pitot line bracket] | * [https://drive.google.com/file/d/124eUTspTteT3eSmWlmUzsF4OzDb2fDbg/view Shawn's wing conduit and pitot line bracket] | ||
* [https://www.facebook.com/groups/vansrv10/posts/7818292061625158 FB thread on printing wing conduit brackets] | * [https://www.facebook.com/groups/vansrv10/posts/7818292061625158 FB thread on printing wing conduit brackets] | ||
| Line 8: | Line 8: | ||
* [https://cad.onshape.com/documents/0159cc595215647fc8f45331/w/6914ca0c1b9d022497358ed8/e/389b1411feea7cc07574cb03?renderMode=0&uiState=66430c2824a2832b7668f30c Conduit holder with variable tilt angle] | * [https://cad.onshape.com/documents/0159cc595215647fc8f45331/w/6914ca0c1b9d022497358ed8/e/389b1411feea7cc07574cb03?renderMode=0&uiState=66430c2824a2832b7668f30c Conduit holder with variable tilt angle] | ||
* [https://www.printables.com/model/716806-rv-air-vent-caps Front RV-10 vent plug] | * [https://www.printables.com/model/716806-rv-air-vent-caps Front RV-10 vent plug] | ||
* [[ | * [[Media:OM-ELA RV-10 compass holder 3d file.stl|Glareshield strut compass holder (stl file), credit Igor, VAF member supik]] | ||
* Consider joining the [https://www.facebook.com/groups/756340465159308 3D Printed Aircraft Parts] FB group. | * Consider joining the [https://www.facebook.com/groups/756340465159308 3D Printed Aircraft Parts] FB group. | ||
* [https://www.facebook.com/groups/vansrv10/posts/8381169962004029 FB thread on avionics fan controller enclosure]<br>[[ | * [https://www.facebook.com/groups/vansrv10/posts/8381169962004029 FB thread on avionics fan controller enclosure]<br>[[Media:Fan controller enclosure V1.stl|Fan controller enclosure V1.stl]]<br>[[Media:Fan controller lid V1.stl|Fan controller lid V1.stl]] | ||
* Current Sensor mount by Rodrigo<br>[[File:Screenshot 2024-10-21 at 4.48.26 PM.png|200x200px]] | * Current Sensor mount by Rodrigo<br>[[File:Screenshot 2024-10-21 at 4.48.26 PM.png|200x200px]] | ||
** [[ | ** [[Media:Mount - Part 1.stl|Mount - Part 1]] | ||
** [[ | ** [[Media:Mount - Part 2.stl|Mount - Part 2]] | ||
* Current Sensor mount for AWG 2 cable by Martin. Uses 3 cable ties to hold the parts and cable together.<br>Onshape Project: [https://cad.onshape.com/documents/7216c1faeed2cb0b42673e0e/w/3e17c5f97999a5ccffcda201/e/2bd458bbefbbbbd84091e10c?renderMode=0&uiState=6810da33d1248a63de0d3bfb current_sensor_mount]<br>[[File:Cur6.png|200x200px]][[File:cur6p.jpeg|200x200px]][[File:cur6p2.jpeg|200x200px]] | * Current Sensor mount for AWG 2 cable by Martin. Uses 3 cable ties to hold the parts and cable together.<br>Onshape Project: [https://cad.onshape.com/documents/7216c1faeed2cb0b42673e0e/w/3e17c5f97999a5ccffcda201/e/2bd458bbefbbbbd84091e10c?renderMode=0&uiState=6810da33d1248a63de0d3bfb current_sensor_mount]<br>[[File:Cur6.png|200x200px]][[File:cur6p.jpeg|200x200px]][[File:cur6p2.jpeg|200x200px]] | ||
** [[ | ** [[Media:Cur6a.stl|Mount - Part 1]] | ||
** [[ | ** [[Media:Cur6b.stl|Mount - Part 2]] | ||
** [[ | ** [[Media:Cur6c.stl|Mount - Part 3]] | ||
* End cap for armrest<br>[[File:Screenshot 2025-02-16 at 4.25.49 PM.png|300x300px]]<br>[[File:Arm rest cap.jpg|300x300px]]<br>[[ | * End cap for armrest<br>[[File:Screenshot 2025-02-16 at 4.25.49 PM.png|300x300px]]<br>[[File:Arm rest cap.jpg|300x300px]]<br>[[Media:Center Console - armrest endcap.stl|End Cap stl file]] | ||
* Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3). | * Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3). | ||
[[File:Door Alignement Jig.jpg|left|thumb|Door alignment jig]] | [[File:Door Alignement Jig.jpg|left|thumb|Door alignment jig]] | ||
| Line 33: | Line 33: | ||
[[ | [[Media:Hinge Bracket Jig STL file.stl|Hinge alignment jig STL file]] | ||
[[File:Hinge Jig In Use.jpg|left|thumb]] | [[File:Hinge Jig In Use.jpg|left|thumb]] | ||
| Line 46: | Line 46: | ||
[[ | [[Category:Optional]] | ||
Revision as of 12:52, 20 July 2025
- Les Kearney's Collection
- Allan's wing conduit and pitot line bracket
- Shawn's wing conduit and pitot line bracket
- FB thread on printing wing conduit brackets
- Oil Cap with center hole for engine dehumidifier
- Conduit holder with variable tilt angle
- Front RV-10 vent plug
- Glareshield strut compass holder (stl file), credit Igor, VAF member supik
- Consider joining the 3D Printed Aircraft Parts FB group.
- FB thread on avionics fan controller enclosure
Fan controller enclosure V1.stl
Fan controller lid V1.stl - Current Sensor mount by Rodrigo
- Current Sensor mount for AWG 2 cable by Martin. Uses 3 cable ties to hold the parts and cable together.
Onshape Project: current_sensor_mount
- End cap for armrest
End Cap stl file - Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3).
