3,777
edits
SECTION 50: CABIN HEAT AND VENTILLATION: Difference between revisions
m
→Page 50-3
m (→Page 50-3) |
m (→Page 50-3) |
||
| Line 8: | Line 8: | ||
* When roughing up the skin in preparation for gluing the Naca vent in using tank sealant, take note that the glue contact area does not follow the opening of the skin all the way around. Towards the rear, the Naca vent extends, so mark the area up using the vent's outline. | * When roughing up the skin in preparation for gluing the Naca vent in using tank sealant, take note that the glue contact area does not follow the opening of the skin all the way around. Towards the rear, the Naca vent extends, so mark the area up using the vent's outline. | ||
* For stock panels, the needed closable eyeball vents are not part of the kit, consider ordering Van's part no "SV-6 Aluminum Air Vent". It comes in silver (clear) and black. You will need #8 bolts / washers / lock-nuts to mount them. Vans also offers a plastic version. | * For stock panels, the needed closable eyeball vents are not part of the kit, consider ordering Van's part no "SV-6 Aluminum Air Vent". It comes in silver (clear) and black. You will need #8 bolts / washers / lock-nuts to mount them. Vans also offers a plastic version. | ||
* Debris or insects may be blown into the cabin through the front fresh-air vents. Consider gluing in a piece of hardware cloth to filter the air stream. | |||