3,777
edits
SECTION 29: FUSE SIDE SKINS: Difference between revisions
m
→29-11
m (→29-21) |
m (→29-11) |
||
| Line 5: | Line 5: | ||
== 29-11 == | == 29-11 == | ||
* See this [https://www.facebook.com/groups/vansrv10/posts/4218804234907310 FB Post] on how to keep the skin and clamping block in place while bending. | * See this [https://www.facebook.com/groups/vansrv10/posts/4218804234907310 FB Post] on how to keep the skin and clamping block in place while bending. | ||
* See this [https://www.facebook.com/groups/vansrv10/posts/7830295577091473 FB Post] on how to use two angle pieces to clamp the skin. | |||
== 29-14 == | == 29-14 == | ||
* Step 5<br>When match drilling from the F-1001B angle into the WD-1002-L / WD-1002-R firewall steel brackets, be aware that it's easy to violate the edge distance in the steel bracket (2 x D, measured from the center of hole). Remedy is to temporarily install a bolt into the engine mount hole to pull the bracket into place and to use a clamp to move the steel bracket to increase edge distance.<br>See [http://www.mykitlog.com/users/display_log.php?user=nbnrv10&project=572&category=6009&log=254638&row=60 this build log]<br>[[File:Screen Shot 2024-01-22 at 11.29.55 AM.png|300x300px]] | * Step 5<br>When match drilling from the F-1001B angle into the WD-1002-L / WD-1002-R firewall steel brackets, be aware that it's easy to violate the edge distance in the steel bracket (2 x D, measured from the center of hole). Remedy is to temporarily install a bolt into the engine mount hole to pull the bracket into place and to use a clamp to move the steel bracket to increase edge distance.<br>See [http://www.mykitlog.com/users/display_log.php?user=nbnrv10&project=572&category=6009&log=254638&row=60 this build log]<br>[[File:Screen Shot 2024-01-22 at 11.29.55 AM.png|300x300px]] | ||