Flap Position Sensor: Difference between revisions
Jump to navigation
Jump to search
m (→Hints) |
m (→Hints) |
||
| Line 3: | Line 3: | ||
* Vans has upgraded the flap motor in 2023 to a model that has an analog voltage output compatible with modern avionics. | * Vans has upgraded the flap motor in 2023 to a model that has an analog voltage output compatible with modern avionics. | ||
* Ray Allen makes the "POS-12" flap position sensor which is needed for the older flap motors. Available at e.g. [https://www.steinair.com/product/pos-12-position-sensor/ Stein Air]. | * Ray Allen makes the "POS-12" flap position sensor which is needed for the older flap motors. Available at e.g. [https://www.steinair.com/product/pos-12-position-sensor/ Stein Air]. | ||
** Installation of the POS-12 is discussed in this: [https://www.facebook.com/ | ** Installation of the POS-12 is discussed in this: [https://www.facebook.com/groups/vansrv10/posts/6997714923682880 FB Post] | ||
Revision as of 16:18, 30 January 2024
Hints
- Vans sells a flap position sensor kit, however it is not sensing the continuous flap deployment angle, rather it is a set of switches that close at specific positions. This sensor is not compatible with modern avionics which need an analog voltage input.
- Vans has upgraded the flap motor in 2023 to a model that has an analog voltage output compatible with modern avionics.
- Ray Allen makes the "POS-12" flap position sensor which is needed for the older flap motors. Available at e.g. Stein Air.
- Installation of the POS-12 is discussed in this: FB Post