3,763
edits
SECTION 34: BAGGAGE DOOR: Difference between revisions
m
→Hints
m (→Hints) |
m (→Hints) |
||
| Line 6: | Line 6: | ||
* [https://www.youtube.com/watch?v=bqsJr1VQ76I Ed's video on how to make the door removable]<br>Note: you will need more hinge pin length than with the stock setup. Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.<br>[[File:2023-12-13 20-19-03.jpg|533x533px]]<br>Split hinge pin with safety wires. | * [https://www.youtube.com/watch?v=bqsJr1VQ76I Ed's video on how to make the door removable]<br>Note: you will need more hinge pin length than with the stock setup. Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.<br>[[File:2023-12-13 20-19-03.jpg|533x533px]]<br>Split hinge pin with safety wires. | ||
==== Page 34-6 ==== | ==== Page 34-6 ==== | ||
* Step 4 - see [[Door_Locks_/_Hinges_/_Handles]] for weather strip options. | * Step 4 - see [[Door_Locks_/_Hinges_/_Handles]] for weather strip options. | ||
* Step 5 - You may not be able to reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or use full rivets and a 12 inch back rivet set. | * Step 5 - You may not be able to reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or use full rivets and a 12 inch back rivet set. | ||
[[Category:Hints]] | |||