GHA-15: Difference between revisions
Jump to navigation
Jump to search
m (→Threads) |
|||
| Line 7: | Line 7: | ||
* [https://vansairforce.net/community/showthread.php?t=218681 VAF] | * [https://vansairforce.net/community/showthread.php?t=218681 VAF] | ||
* [https://www.facebook.com/groups/vansrv10/posts/6340273269427052 FB] | * [https://www.facebook.com/groups/vansrv10/posts/6340273269427052 FB] | ||
==== Installation Manual ==== | |||
* The G3X Touch installation manual covers the GHA-15 | |||
==== Tools / Parts Needed ==== | ==== Tools / Parts Needed ==== | ||
Revision as of 14:37, 6 October 2023
Garmin GHA-15 Radar Altimeter
Videos
Threads
Installation Manual
- The G3X Touch installation manual covers the GHA-15
Tools / Parts Needed
- K40 Positioner for DMC Crimper
- Amazon USB-B bulkhead debug connector (instead of Garmin pigtail part no 011-01782-00 which is just a coupling, not a bulkhead connector)
Color code: Black: GND (GHA-15 pin 20), Red: +5V (GHA-15 pin 19), White: D- (GHA-15 pin 10), Green: D+ (GHA-15 pin 9)
The wire will fit through a 1/4 inch snap bushing (before crimping the pins)
- The 10-32 mounting screws are included. If you need more, those are MS51958-67, e.g. McMaster part number 91400A833 (pack of 25, same bolts needed for GPS antennas)
- 4 x 10-32 nut plates, e.g. K1000-3 / MS21047L3
- 63/1000 2024T3 doubler, e.g. 4 x 4 inches
