Tony's Build Instructions: Difference between revisions
Jump to navigation
Jump to search
(→Hints) |
|||
| Line 11: | Line 11: | ||
[[File:Cradle_mod2.jpeg|500px]] | [[File:Cradle_mod2.jpeg|500px]] | ||
A 20 inch inner tube can be used to lift the fuselage [https://www.amazon.com/dp/B00S8GO75M At Amazon]. | A 20 inch inner tube can be used to lift the fuselage. [https://www.amazon.com/dp/B00S8GO75M At Amazon]. | ||
Revision as of 05:59, 24 March 2022
Link to the Instructions.
Hints
If you are receiving a QB fuse, you will not be able to drop the fuselage onto this cradle if Vans put the bottom wing spar bolts in with the threads pointing forward. You need to put them in the other way beforehand. Make sure you add the plastic "washers" and plastic bolt sleeve back in to protect the spar.
Modifications
One important modification of the cradle build instructions is to make the rear bar removable to allow riveting the tailcone to the fuselage. Use a SIMPSON STRONG-TIE 1-13/16" x 5" 22 Gauge Nail Plate on both sides to hold the rear carpet covered bar.
A 20 inch inner tube can be used to lift the fuselage. At Amazon.