SECTION 46: ENGINE MOUNT & LANDING GEAR: Difference between revisions
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
* 10/06/20 [https://www.vansaircraft.com/wp-content/uploads/2020/10/46_10.pdf 46_10.pdf] | * 10/06/20 [https://www.vansaircraft.com/wp-content/uploads/2020/10/46_10.pdf 46_10.pdf] | ||
Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | ||
----- | |||
==== Page 46-06 ==== | |||
* Don't forget to grease the bushings on their outside. | |||
* Tighten to castle nuts to spec, the bushing itself must not rotate. Check that the parts riding on the outside of the bushings still rotate after torquing the castle nuts. If not, see figure 1, it says to remove some of the powder coating if necessary. | |||
Revision as of 19:36, 9 April 2023
Build Instruction Updates
- 10/06/20 46_10.pdf
Check for more recent updates here
Page 46-06
- Don't forget to grease the bushings on their outside.
- Tighten to castle nuts to spec, the bushing itself must not rotate. Check that the parts riding on the outside of the bushings still rotate after torquing the castle nuts. If not, see figure 1, it says to remove some of the powder coating if necessary.