3,777
edits
Airflow Systems: Difference between revisions
m
→Hints
m (→Painting) |
m (→Hints) |
||
| Line 1: | Line 1: | ||
==== Hints ==== | ==== Hints ==== | ||
===== Summary of Engine modifications ==== | |||
* send the stock flywheel in for adding the serpentine grooves. Consider sending it away for anodizing afterwards. | |||
* install 4 Lycoming P/N 38-14 studs in engine block below governor | |||
* mount B&C LX60 60A alternator using bracket FK5402-4 | |||
* use Sky-Tec 149NL starter | |||
* route governor over the top of the engine using Vans bracket VA-153-PC | |||
===== Governor ===== | ===== Governor ===== | ||
* The governor control cable needs to be routed across the top of the engine. The manual states "Reroute the prop governor control cable over the top of the engine utilizing the Van’s Aircraft bracket, part no. VA-153-PA or VA-183-PC (depending on your need). Note in the photos that the bracket may require modification to clear the pushrod tube." Neither of those parts are in the Vans store. The part is now called VA-153-PC.<br>[[File:Screen Shot 2022-07-13 at 9.34.47 AM.png|312px]] | * The governor control cable needs to be routed across the top of the engine. The manual states "Reroute the prop governor control cable over the top of the engine utilizing the Van’s Aircraft bracket, part no. VA-153-PA or VA-183-PC (depending on your need). Note in the photos that the bracket may require modification to clear the pushrod tube." Neither of those parts are in the Vans store. The part is now called VA-153-PC.<br>[[File:Screen Shot 2022-07-13 at 9.34.47 AM.png|312px]] | ||