28
edits
SECTION 32: TAILCONE ATTACHMENT: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
** bulkhead (F-1006B) | ** bulkhead (F-1006B) | ||
** rib tabs (e.g. F-1019-R) | ** rib tabs (e.g. F-1019-R) | ||
* Use plastic wedges to guide the tailcone bottom skin to go above the fuselage bottom skin, e.g. [https://www.amazon.com/gp/product/B07XCHZBV5 at Amazon] | * Use plastic wedges to guide the tailcone bottom skin to go above (inside) the fuselage bottom skin, e.g. [https://www.amazon.com/gp/product/B07XCHZBV5 at Amazon] | ||
* Use two thin strips of aluminum (3/4 inch wide) in the bottom corner sections to guide the tabs of the tailcone to go inside the fuselage skin. | * Use two thin strips of aluminum (3/4 inch wide) in the bottom corner sections to guide the tabs of the tailcone to go inside the fuselage skin. | ||
* Use an inflated 20 inch truck inner tube underneath the fuselage center to lift the fuselage slightly, allowing a swivel motion within the fuselage cradle constraints e.g. [https://www.amazon.com/dp/B00S8GO75M at Amazon] | * Use an inflated 20 inch truck inner tube underneath the fuselage center to lift the fuselage slightly, allowing a swivel motion within the fuselage cradle constraints e.g. [https://www.amazon.com/dp/B00S8GO75M at Amazon] | ||