SECTION 27: FIREWALL: Difference between revisions

SECTION 27: FIREWALL (view source)

3 bytes added , 1 September 2022

m

no edit summary

3,763

edits

@@ Line 10: / Line 10: @@
 * For additional info, see also section [[QB_Fuselage]]
 * Plan your control cables pass-throughs at step 3
-* Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.<br>Many use these for the control cable penetrations (at Spruce: [https://www.aircraftspruce.com/catalog/appages/eyeballfw2.php EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP]):<br>[[File:Eyeball Pass-thru.png]] More products, including double cable models are here: http://www.doubleteeproducts.com/doubleteefirewallproducts/
+* Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.<br>Many use these for the control cable penetrations (at Spruce: [https://www.aircraftspruce.com/catalog/appages/eyeballfw2.php EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP]):<br>[[File:Eyeball Pass-thru.png]]<br>More products, including double cable models are here: http://www.doubleteeproducts.com/doubleteefirewallproducts/
 * Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:<br>[[File:Ff-00001.png|659x659px]]
 * Many people have used the following pass-thru with the RV-10 (at Spruce: [https://www.aircraftspruce.com/catalog/hapages/ssfirewallkit12-04762.php?clickkey=5015617 Avery SS Firewall Pass-Thru]):<br>[[File:Avery SS Pass-Thru.png|304x304px]]