3,777
edits
Airflow Systems: Difference between revisions
Jump to navigation
Jump to search
m
→Hints
m (→Hints) |
m (→Hints) |
||
| Line 8: | Line 8: | ||
*The rivets of the flat shelf support are spaced with a different distance than the side / upper skin rivets that aren't riveted yet. Due to this, it's unavoidable that some rivets will be at the exact same location as the side rivets. New holes need to be found that don't have a conflict. | *The rivets of the flat shelf support are spaced with a different distance than the side / upper skin rivets that aren't riveted yet. Due to this, it's unavoidable that some rivets will be at the exact same location as the side rivets. New holes need to be found that don't have a conflict. | ||
*The evaporator shelf can be cut easily with a [https://www.homedepot.com/p/Dremel-1-1-4-in-Rotary-Tool-Carbide-Cutting-Shaping-Wheel-for-Use-on-Woods-Fiberglass-Plastics-and-Laminates-543/202315728 Dremel 543 Cutoff Wheel] | *The evaporator shelf can be cut easily with a [https://www.homedepot.com/p/Dremel-1-1-4-in-Rotary-Tool-Carbide-Cutting-Shaping-Wheel-for-Use-on-Woods-Fiberglass-Plastics-and-Laminates-543/202315728 Dremel 543 Cutoff Wheel] | ||
* The rivets supplied for mounting the evaporator shelf are not usable for the purpose. They have a marking of "OIDC" instead of a small center dimple. They are made of a soft alloy. Use proper aircraft AD rivets instead. The rivets are not used in a shear fashion, rather the shelf hangs off the rivets underneath the longeron. They need to be strong. | |||
* The kit has only one washer per bolt to attach the evaporator shelf to the side braces. Better to use a washer on the top and bottom to distribute forces across the soft fiberglass | |||