Antennas: Difference between revisions
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
* Doubler Plates | * Doubler Plates | ||
** [https://www.steinair.com/product/ga-35-gps-antenna-doubler/ Stainair Garmin GA-35 / GA-55 / GA-56 GPS Antenna Doubler] | ** [https://www.steinair.com/product/ga-35-gps-antenna-doubler/ Stainair Garmin GA-35 / GA-55 / GA-56 GPS Antenna Doubler] | ||
** [https://www.steinair.com/product/garmin-gps-xm-antenna-doubler/ Steinair Garmin GA-57X GPS/XM antenna doubler] | |||
** [https://www.chiefaircraft.com/gmn-115-00846-10.html Garmin GA-35 / GA-55 / GA-56 GPS Antenna Doubler (Part 115-00846-10)] | ** [https://www.chiefaircraft.com/gmn-115-00846-10.html Garmin GA-35 / GA-55 / GA-56 GPS Antenna Doubler (Part 115-00846-10)] | ||
** [https://www.steinair.com/product/bent-whip-com-antenna-doubler/ Steinair Comant CI-121 Bent Whip Antenna Doubler] | ** [https://www.steinair.com/product/bent-whip-com-antenna-doubler/ Steinair Comant CI-121 Bent Whip Antenna Doubler] | ||
** [https://www.steinair.com/product/ci-105-dme-transponder-antenna-doubler/ Steinair Comant CI-105 DME Transponder Antenna Doubler] | ** [https://www.steinair.com/product/ci-105-dme-transponder-antenna-doubler/ Steinair Comant CI-105 DME Transponder Antenna Doubler] | ||
* Installation Manuals | * Installation Manuals | ||
Revision as of 15:02, 6 July 2022
Mounting Instructions
- EAA Videos
- Doubler Plates
- Installation Manuals
Antennas
Example of Bob Archer NAV / Glideslope Antenna mounted in aftermarket Aveo ZipTip.
Frequency plot of Bob Archer antenna (shows 50 Ohm and resonance in the VOR/LOC frequency range of 108-118 MHz):
ELT Antenna Placement
- ELT antenna installation is governed by 14 CFR § 91.207 and AC 91-44A: It asks for:
- "Proper installation" (which means you need to follow the installation instruction from the ELT manufacturer)
- "The presence of a sufficient signal radiated from its antenna" (annual test).
- The antenna to be vertically mounted
- You may install the antenna inside the airplane if
- The airplane skin is non conductive (the RV-10 fiberglass canopy area should be fine) or the antenna is centered behind a window of at least 12 x 12 inch size
- You provide a ground plane for it (24 inches radius for 121 MHz!)