Antennas: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
**[https://www.eaa.org/Videos/Hints-for-Homebuilders/Electrical/38486239001 Antenna Coax Connectors 2] | **[https://www.eaa.org/Videos/Hints-for-Homebuilders/Electrical/38486239001 Antenna Coax Connectors 2] | ||
**[https://www.eaa.org/videos/77829561001 ELT Installation] | **[https://www.eaa.org/videos/77829561001 ELT Installation] | ||
* Doubler Plates | |||
** [https://www.steinair.com/product/ga-35-gps-antenna-doubler/ GA 35 GPS Antenna Doubler] | |||
** [https://www.steinair.com/product/bent-whip-com-antenna-doubler/ Comant CI-121 Bent Whip Antenna Doubler] | |||
=== Antennas === | === Antennas === | ||
Revision as of 05:00, 6 July 2022
Mounting Instructions
- EAA Videos
- Doubler Plates
Antennas
Example of Bob Archer NAV / Glideslope Antenna mounted in aftermarket Aveo ZipTip.
Frequency plot of Bob Archer antenna (shows 50 Ohm and resonance in the VOR/LOC frequency range of 108-118 MHz):
ELT Antenna Placement
- ELT antenna installation is governed by 14 CFR § 91.207 and AC 91-44A: It asks for:
- "Proper installation" (which means you need to follow the installation instruction from the ELT manufacturer)
- "The presence of a sufficient signal radiated from its antenna" (annual test).
- The antenna to be vertically mounted
- You may install the antenna inside the airplane if
- The airplane skin is non conductive (the RV-10 fiberglass canopy area should be fine) or the antenna is centered behind a window of at least 12 x 12 inch size
- You provide a ground plane for it (24 inches radius for 121 MHz!)