Wing Tips: Difference between revisions
Jump to navigation
Jump to search
m (Formatting) |
|||
| Line 16: | Line 16: | ||
== Zip Tips Power Measurements == | == Zip Tips Power Measurements == | ||
* Landing light: 2.28A per side | |||
* Taxi light: 1.5A per side | |||
* Nav light: 0.65A per side | |||
* Strobe: 2A average per side (14% duty cycle, 14A per side when flash occurs) | |||
Revision as of 14:57, 8 May 2022
Kit Deletions
- If you are going with 3rd party wing tips, delete the following from the wing kit:
- W-1015-L (left tip)
- W-1015-R (right tip)
- VA-193 (pair of lenses)
- Bag 967 (lens hardware)
Companies providing aftermarket Wing Tips
Zip Tips Installation Hints
- Rodrigo Damazio Bovendorp time laps video 1
- When installing per Van's instructions, it is important to rig the ailerons before to ensure alignment with the trailing edge of the wing tip (note: elevator position influences aileron slightly).
- The Zip Tips are not as flexible as Van's and getting them to match can be challenge. There is a note in the RV-14 manual using a ratchet strap that I found helpful.

- If you have received Vans part W-1016, it will show you the amount of "bending" you will have to give the wingtip. Below is a picture comparing W-1016 to the insert that comes with the Zip Tips.

Zip Tips Power Measurements
- Landing light: 2.28A per side
- Taxi light: 1.5A per side
- Nav light: 0.65A per side
- Strobe: 2A average per side (14% duty cycle, 14A per side when flash occurs)