3,777
edits
SECTION 43: CABIN COVER: Difference between revisions
m
→Page 43-8 Center Strut and Windscreen
m (Added overhead console photo.) |
|||
| Line 81: | Line 81: | ||
* Step 5 | * Step 5 | ||
** The kit comes with three 3 inch cutting discs for trimming acrylic ([https://store.vansaircraft.com/norton-cutting-disc-3-tool-3-cutting-disc.html Norton Discs]). You might have to enlarge the very small center hole to make it fit your grinder or to fit into a cut-off disc arbor. High rpms are not necessary for cutting acrylic, an arbor in a standard drill works fine. | ** The kit comes with three 3 inch cutting discs for trimming acrylic ([https://store.vansaircraft.com/norton-cutting-disc-3-tool-3-cutting-disc.html Norton Discs]). You might have to enlarge the very small center hole to make it fit your grinder or to fit into a cut-off disc arbor. High rpms are not necessary for cutting acrylic, an arbor in a standard drill works fine. | ||
[[ | ==== Page 43-12 Hardware ==== | ||
* Step 1 | |||
** On the forward door post, the longer 10R14 bolts go into the 3 upper holes, the shorter 10R11 ones go into the lower 5 holes. | |||
[[Category:Hints]] | |||