SECTION 27: FIREWALL: Difference between revisions

SECTION 27: FIREWALL (view source)

Revision as of 13:50, 23 February 2025

436 bytes added , 23 February

Added Before You Start section

VisualWikitext

Kirkbauer

183

edits

@@ Line 1: / Line 1: @@
-'''Note: the firewall will really cut you up until you thoroughly deburr it; just another note here if you don't take the note seriously in the manual.'''
 === Build Instruction Updates ===
 * N/A
 Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here]
+'''Note: the firewall will really cut you up until you thoroughly deburr it; just another note here if you don't take the note seriously in the build instructions.'''
 === Videos ===
 * [https://www.youtube.com/watch?v=dY1PJQr3pZk Austin Manke: RV-10 Firewall - Section 27]
-=== Supplies ===
-* Suggest using this instead of fuel tank sealant in/around the firewall (I used it around F-1039D and in the next chapter on the lower flange of the firewall): https://www.aircraftspruce.com/catalog/appages/firewall2000caulk.php
+=== Before You Start ===
+Special/New Tools/Supplies
+* Suggest using [https://www.aircraftspruce.com/catalog/appages/firewall2000caulk.php Fire Caulk] instead of fuel tank sealant in/around the firewall (it can be used around F-1039D and in the next chapter on the lower flange of the firewall)
+* You may need a [https://cleavelandtool.com/products/12-long-double-offset-back-rivet-set double-offset back rivet set] that wasn't mentioned in the official tool list
+Modifications to Consider
 * Consider upgrading the TG-10-R and TG-10-L cabin heat selector boxes to stainless steel: https://www.aircraftspruce.com/catalog/eppages/heaterbypass3.php
-* I found that I needed a double-offset back rivet set that wasn't mentioned in the official tool list: https://cleavelandtool.com/products/12-long-double-offset-back-rivet-set
+* It's not needed in this section but while ordering the stainless heat selector boxes, consider getting a [https://www.aircraftspruce.com/catalog/pnpages/AN837-6.php steel fuel fitting] and [https://www.aircraftspruce.com/catalog/pnpages/AN924-6.php steel nut]
-* You might want 1ft of this (see below): https://www.aircraftspruce.com/catalog/appages/koolmat.php
+* You might want 1ft of [https://www.aircraftspruce.com/catalog/appages/koolmat.php koolmat] (see below)
+* Consider how you want to pass control cables through the firewall (more details below)
 === Firewall Breakdown ===