183
edits
SECTION 27: FIREWALL: Difference between revisions
→PAGE 27-1
(Pre-cut side angle flanges for section 29.) |
|||
| Line 20: | Line 20: | ||
If you want to do this, you'll want to trim the flange (the part that points aft of the firewall) at each end of each part. I'd suggest trimming 3" from each end of each flange. Here is a picture showing what it looked like after I had to trim it later to give you an idea of the shape you'll need to cut out of the flanges. | If you want to do this, you'll want to trim the flange (the part that points aft of the firewall) at each end of each part. I'd suggest trimming 3" from each end of each flange. Here is a picture showing what it looked like after I had to trim it later to give you an idea of the shape you'll need to cut out of the flanges. | ||
[[File:2024-10-09 20.43.27.jpg|thumb|Trimmed bottom flange of F-1001M Left Side Angle in order to fit my angle drill bit in for the match drill.]] | |||
== PAGE 27-2 == | == PAGE 27-2 == | ||