3,777
edits
BRS Installation Hints: Difference between revisions
m
→Top Rear Attachment Gussets
| Line 7: | Line 7: | ||
*The fastener holes need a #19 drill. | *The fastener holes need a #19 drill. | ||
*The two larger 1/4 inch holes that need to be match drilled should be pre-drilled with a smaller diameter drill bit first using the 1/4 to 1/8 inch bushing which comes with the RV-10 kit. | *The two larger 1/4 inch holes that need to be match drilled should be pre-drilled with a smaller diameter drill bit first using the 1/4 to 1/8 inch bushing which comes with the RV-10 kit. | ||
*The big round hole of the angle bracket that needs to be match-drilled into the top skin has the size of a 1.5 inch conduit (actual hole size: 1.951 inches). Very easy to do with a hydraulic punch, e.g. [https://www.amazon.com/gp/product/B07RT8RKQL at Amazon]. Suitable | *The big round hole of the angle bracket that needs to be match-drilled into the top skin has the size of a 1.5 inch conduit (actual hole size: 1.951 inches). Very easy to do with a hydraulic punch, e.g. [https://www.amazon.com/gp/product/B07RT8RKQL at Amazon]. Suitable should also be a bare punch set that uses a bolt instead of hydraulics, e.g. [https://www.amazon.com/AMZCNC-Conduit-Knockout-Punch-Manual/dp/B0B5K9L2CW/ref=sr_1_6 at Amazon]. | ||