3,777
edits
Airflow Systems: Difference between revisions
Jump to navigation
Jump to search
m
→Hose Routing
m (→Hose Routing) |
m (→Hose Routing) |
||
| Line 46: | Line 46: | ||
* There are two options for routing the hoses: through the tunnel or within the side walls. The kit contains only the fittings for the tunnel option (which needs "Z" adapters for the condenser; for routing in the side walls, you need plain 90 degree adapters on the condenser). Specify which routing you want when ordering. Airflow will exchange the Z fittings for 90 degree ones on request however they are made to order and it takes several weeks. | * There are two options for routing the hoses: through the tunnel or within the side walls. The kit contains only the fittings for the tunnel option (which needs "Z" adapters for the condenser; for routing in the side walls, you need plain 90 degree adapters on the condenser). Specify which routing you want when ordering. Airflow will exchange the Z fittings for 90 degree ones on request however they are made to order and it takes several weeks. | ||
*When running the hoses outside the tunnel, they recommend running them to the right side of the firewall as the left side is busy with the oil cooler. | *When running the hoses outside the tunnel, they recommend running them to the right side of the firewall as the left side is busy with the oil cooler. | ||
*Note: If you use the [https://www.aerosportproducts.com/product/rv-10-interior-panels-2/ Aerosport interior panels], keep in mind that the recessed area for maps / the cup holder occupies the space between the panel and the outer skin which is separated by U-profiles all around, where you would probably want to route the hoses through. There is room for one hose all the way on the top but a modification to the right side panel is need if you run the second hose underneath it. | |||
*No snap bushings come with the kit. Consider ordering | *No snap bushings come with the kit. Consider ordering | ||
** [https://www.mcmaster.com/catalog/5269T19 McMaster Part No 5269T19, Snap Bushings for 3/4 inch hose] or<br>[https://www.mcmaster.com/catalog/5269T107 McMaster Part No 5269T107, Snap Bushing for 3/4 inch hose, one size up and split] | ** [https://www.mcmaster.com/catalog/5269T19 McMaster Part No 5269T19, Snap Bushings for 3/4 inch hose] or<br>[https://www.mcmaster.com/catalog/5269T107 McMaster Part No 5269T107, Snap Bushing for 3/4 inch hose, one size up and split] | ||
** [https://www.amazon.com/gp/product/B01LP4F0EU Snap Bushings for 11/16 inch hose at Amazon] or<br>[https://www.mcmaster.com/catalog/5269T106 McMaster Part No 5269T106, Snap Bushing for 11/16 hose, one size up and split] | ** [https://www.amazon.com/gp/product/B01LP4F0EU Snap Bushings for 11/16 inch hose at Amazon] or<br>[https://www.mcmaster.com/catalog/5269T106 McMaster Part No 5269T106, Snap Bushing for 11/16 hose, one size up and split] | ||
===== Crimping Fittings to the Hoses ===== | |||
* A suitable crimper for the hoses is e.g. $224 at eBay: [https://www.ebay.com/itm/232525885895 Standard and Reduced Barrier A/C Hose Hydraulic Crimper Kit with 7pc Die Set] | |||
* Reduced barrier hoses, which are used for ACs, have a second liner on the inside of the hose to keep the gas from leaking. To protect the inner liner, the hose will go onto the fitting very easily, even with a bit of slack, this is normal. The hose sits tight on the center barb after the crimp. | |||
===== Dryer Mounting ===== | ===== Dryer Mounting ===== | ||