SECTION 8: HORIZONTAL STABILIZER: Difference between revisions
Jump to navigation
Jump to search
m (→Page 8-7) |
|||
| Line 3: | Line 3: | ||
Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | ||
==== Page 8-7 ==== | ==== Page 8-7 ==== | ||
* Step 3: only cut back the corner on the front edge of the nose rib, not the entire front edge because then you will violate the edge distance for the foremost rivet. See also this [https://www.facebook.com/groups/vansrv10/posts/5918655041588879 FB thread]. | |||
* Step 4: Very likely that the nose rib that came with a recent kit already has the holes in the web that step 4 calls out for making | * Step 4: Very likely that the nose rib that came with a recent kit already has the holes in the web that step 4 calls out for making | ||
Revision as of 22:19, 22 March 2023
Build Instruction Updates
- 10/05/21 08_10.pdf
Check for more recent updates here
Page 8-7
- Step 3: only cut back the corner on the front edge of the nose rib, not the entire front edge because then you will violate the edge distance for the foremost rivet. See also this FB thread.
- Step 4: Very likely that the nose rib that came with a recent kit already has the holes in the web that step 4 calls out for making