224
edits
SkyDesigns Installation Hints: Difference between revisions
m
Minor addition to parts listing
(Added ER build notes) |
m (Minor addition to parts listing) |
||
| Line 3: | Line 3: | ||
''NOTE: make sure you have the most recent plans from SkyDesigns. For example, pages 4 and 5 of their 16-2 plans were last modified on 03-28-24.'' | ''NOTE: make sure you have the most recent plans from SkyDesigns. For example, pages 4 and 5 of their 16-2 plans were last modified on 03-28-24.'' | ||
The ER Tanks are available for New Build and for Retro Fit, where you already have | The ER Tanks are available for New Build and for Retro Fit, where you already have your wings and tanks built. | ||
==== Additional parts needed for new build (not provided in Van's Wing Kit and ER kit) ==== | |||
==== | * Two (2) W-822PP (order from Van's) | ||
* Your wing kit from Van's came with 2x 6ft J-Channel and 2x 8ft J-Channel. The 6ft are for the tanks and the 8ft are for the outboard leading edge. As long as you have not cut these yet you can simply switch them and use the 8ft for the tanks and 6ft for the outboard leading edge. If you have already cut the 8ft pieces then you'll need to order two additional 8ft J-Channels. | |||
==== Additional Parts that are not specified in the BOM, but that you will need for retrofit build ==== | |||
* Rivets. The number of AD41-H and AD42-H called out in the BOM are for one tank only. You need double that. | * Rivets. The number of AD41-H and AD42-H called out in the BOM are for one tank only. You need double that. | ||
* T-1011 says 1 pack of seven. Note that the VAN's skew is for 1 each only, you need a total of 7. Make sure you get the right number. | * T-1011 says 1 pack of seven. Note that the VAN's skew is for 1 each only, you need a total of 7. Make sure you get the right number. | ||