Tools needed to wire a Garmin panel: Difference between revisions
(Created page with "* DMC AFM8 Crimp Tool M22520/2-01 * K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) * K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) * Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc * Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red * Pin removal tool high density, e.g. Step N Go, M81969/1-04, green * Hex Allen Tool 3/32, at least 2 3/4 in...") |
No edit summary |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
* DMC AFM8 Crimp Tool M22520/2-01 | * DMC AFM8 Crimp Tool M22520/2-01 [https://www.steinair.com/product/daniels-mil-spec-crimper-afm8-m225202-01/] | ||
* K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) | * K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) [https://www.steinair.com/product/afm8-mil-spec-positioner-for-standard-d-sub-connectors-both-male-female/] | ||
* K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) | * K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) [https://www.aircraftspruce.com/catalog/topages/positioner11-12212.php] | ||
* Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc | * Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc, e.g. at Amazon [https://www.amazon.com/gp/product/B000RFSWF8] | ||
* Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red | * Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red | ||
* Pin removal tool high density, e.g. Step N Go, M81969/1-04, green | * Pin removal tool high density, e.g. Step N Go, M81969/1-04, green | ||
* Hex | * Hex Screwdriver 3/32, at least 2 3/4 inches long, e.g. in set of article 5709A38 at https://www.mcmaster.com/ | ||
* Crimp tool for coax and car connectors (ground), e.g. [https://www.steinair.com/product/ratcheting-crimper-frame-only/] | |||
* Coax dies for above tool, e.g. [https://www.steinair.com/product/bnc-crimp-die-only/] | |||
* Car connector dies for above tool, e.g. [https://www.steinair.com/product/insulated-terminal-die-only/] | |||
* Solder station, e.g. [https://www.steinair.com/product/weller-digital-solder-station-2/] | |||
* Fine tip for above solder station [https://www.amazon.com/gp/product/B01MRLJ9ZF] | |||
* Digital heat gun, e.g. [https://www.steinair.com/product/steinel-digital-heat-gun/] | |||
=== Material === | |||
* Solder sleeves, starter kit, e.g. this kit [https://www.steinair.com/product/solder-sleeve-kit/] | |||
* Solder sleeves, additional, e.g. 50 x [https://www.steinair.com/product/732-solder-sleeve/] | |||
* Grounding wires, additional, e.g. [https://www.steinair.com/product/22-awg-green-mil-spec-wire-8-lengths/] | |||
* Garmin suggested highest quality CAN Bus wire, e.g. [https://www.steinair.com/product/can-bus-wire/] | |||
* Shield fasteners for Garmin connectors (not included in connector kits, except for remote COM) | |||
** McMaster 91772A191 SS Screw | |||
** McMaster 90107A010 SS Washer | |||
** McMaster 92147A425 SS Split Washer | |||
* BNC antenna connector straight (G3X GPS, VHF, NAV) [https://www.aircraftspruce.com/catalog/elpages/coaxialcableconnectors3.php] | |||
* BNC antenna connector 90 degree (G3X GPS, VHF, NAV) [https://www.aircraftspruce.com/catalog/elpages/bnc_11-17167.php] | |||
* TNC antenna connector straight (certified GPS) [https://www.aircraftspruce.com/catalog/elpages/amphenol11-15369.php] | |||
* TNC antenna connector 90 degree (certified GPS) [https://www.aircraftspruce.com/catalog/elpages/amphenol11-15368.php] | |||
Latest revision as of 17:23, 27 March 2022
- DMC AFM8 Crimp Tool M22520/2-01 [1]
- K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) [2]
- K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) [3]
- Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc, e.g. at Amazon [4]
- Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red
- Pin removal tool high density, e.g. Step N Go, M81969/1-04, green
- Hex Screwdriver 3/32, at least 2 3/4 inches long, e.g. in set of article 5709A38 at https://www.mcmaster.com/
- Crimp tool for coax and car connectors (ground), e.g. [5]
- Coax dies for above tool, e.g. [6]
- Car connector dies for above tool, e.g. [7]
- Solder station, e.g. [8]
- Fine tip for above solder station [9]
- Digital heat gun, e.g. [10]
Material
- Solder sleeves, starter kit, e.g. this kit [11]
- Solder sleeves, additional, e.g. 50 x [12]
- Grounding wires, additional, e.g. [13]
- Garmin suggested highest quality CAN Bus wire, e.g. [14]
- Shield fasteners for Garmin connectors (not included in connector kits, except for remote COM)
- McMaster 91772A191 SS Screw
- McMaster 90107A010 SS Washer
- McMaster 92147A425 SS Split Washer
- BNC antenna connector straight (G3X GPS, VHF, NAV) [15]
- BNC antenna connector 90 degree (G3X GPS, VHF, NAV) [16]
- TNC antenna connector straight (certified GPS) [17]
- TNC antenna connector 90 degree (certified GPS) [18]