Tony's Build Instructions: Difference between revisions
Jump to navigation
Jump to search
(Created page with "[[File:cradle_mod1.jpg|500px] * One important modification of the cradle build instructions is to make the rear bar removable to allow riveting the tailcone to the fuselage. Use a SIMPSON STRONG-TIE 1-13/16" x 5" 22 Gauge Nail Plate on both sides to hold the rear carpet covered bar.") |
mNo edit summary |
||
| (11 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File: | Link to the [https://www.tonysrv10.com/pdf/FuselageCradle_050320.pdf Instructions] (seems offline). | ||
Local copy: [[Media:FuselageCradle 050320.pdf|FuselageCradle 050320.pdf]] | |||
== Hints == | |||
If you are receiving a QB fuse, you will not be able to drop the fuselage onto this cradle if Vans put the bottom wing spar bolts in with the threads pointing forward. You need to put them in the other way beforehand. Make sure you add the plastic "washers" and plastic bolt sleeve back in to protect the spar. | |||
== Modifications == | |||
[[File:Cradle_mod1.jpeg|500px]] | |||
One important modification of the cradle build instructions is to make the rear bar removable to allow riveting the tailcone to the fuselage. Use a SIMPSON STRONG-TIE 1-13/16" x 5" 22 Gauge Nail Plate on both sides to hold the rear carpet covered bar. | |||
[[File:Cradle_mod2.jpeg|500px]] | |||
A 20 inch inner tube can be used to lift the fuselage. [https://www.amazon.com/dp/B00S8GO75M At Amazon]. | |||
Latest revision as of 15:36, 27 September 2025
Link to the Instructions (seems offline).
Local copy: FuselageCradle 050320.pdf
Hints
If you are receiving a QB fuse, you will not be able to drop the fuselage onto this cradle if Vans put the bottom wing spar bolts in with the threads pointing forward. You need to put them in the other way beforehand. Make sure you add the plastic "washers" and plastic bolt sleeve back in to protect the spar.
Modifications
One important modification of the cradle build instructions is to make the rear bar removable to allow riveting the tailcone to the fuselage. Use a SIMPSON STRONG-TIE 1-13/16" x 5" 22 Gauge Nail Plate on both sides to hold the rear carpet covered bar.
A 20 inch inner tube can be used to lift the fuselage. At Amazon.