SECTION 29: FUSE SIDE SKINS: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== 29-14 == * Step 5<br>When match drilling from the F-1001B angle into the WD-1002-L / WD-1002-R firewall steel brackets, be aware that it's easy to violate the edge distance in the steel bracket (2 x D, measured from the center of hole). Remedy is to temporarily install a bolt into the engine mount hole to pull the bracket into place and to use a clamp to move the steel bracket in to increase edge distance.<br>See also [https://www.facebook.com/groups/vansrv10/posts/49...") |
(No difference)
|
Revision as of 05:50, 20 April 2022
29-14
- Step 5
When match drilling from the F-1001B angle into the WD-1002-L / WD-1002-R firewall steel brackets, be aware that it's easy to violate the edge distance in the steel bracket (2 x D, measured from the center of hole). Remedy is to temporarily install a bolt into the engine mount hole to pull the bracket into place and to use a clamp to move the steel bracket in to increase edge distance.
See also FB post 4/17/2022