SECTION OP-56: TAIL LIGHTING: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Notes: | Notes: | ||
* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues, seems a tie what is better. | * The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues, seems a tie what is better. | ||
* | |||
* See also discussions | * See also discussions | ||
** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022] | ** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022] | ||
** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019] | ** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019] | ||
Revision as of 15:13, 31 March 2022
Notes:
- The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues, seems a tie what is better.
- See also discussions
- FB Post 3/29/2022
- FB Post 12/24/2019