SECTION 18: FUEL TANK: Difference between revisions
Jump to navigation
Jump to search
m (→Page 18-5) |
m (→Page 18-5) |
||
| Line 17: | Line 17: | ||
==== Page 18-5 ==== | ==== Page 18-5 ==== | ||
* Figure 3, the rivet diagram, has a hole with no rivet callout. It's near the bottom of the diagram, roughly in the middle. This hole is only on the bottom side to get the rear baffle oriented correctly. The flange angles are not the same for upper and lower side. See this [https://www.facebook.com/groups/vansrv10/posts/8695012687286420 FB post for details]. See also this [https://vansairforce.net/threads/three-holes-in-t-1002.30132/#post-1629687 VAF post for details]. See also this [https://vansairforce.net/threads/fuel-tank-mystery-hole.121986/#post-995109 VAF thread] for details. | * Figure 3, the rivet diagram, has a hole with no rivet callout. It's near the bottom of the diagram, roughly in the middle. This hole is only on the bottom side to get the rear baffle oriented correctly. The flange angles are not the same for upper and lower side. Use the same rivet as for the neighbor ones (AN426AD3-3.5). See this [https://www.facebook.com/groups/vansrv10/posts/8695012687286420 FB post for details]. See also this [https://vansairforce.net/threads/three-holes-in-t-1002.30132/#post-1629687 VAF post for details]. See also this [https://vansairforce.net/threads/fuel-tank-mystery-hole.121986/#post-995109 VAF thread] for details. | ||
==== Page 18-6 ==== | ==== Page 18-6 ==== | ||
Revision as of 05:58, 9 December 2024
Build Instruction Updates
- N/A
Check for more recent updates here
Note: Seems, the T-1004 ribs have changed in 2024 to a -1 revision with a heptagon hole. See this FB thread.
Videos (Definitely watch the Vans Video!)
Hints
- Deburr the ribs before fluting
- Check threads on leak testing
- Countersink 3-x skin rivet holes in T-1005
Page 18-5
- Figure 3, the rivet diagram, has a hole with no rivet callout. It's near the bottom of the diagram, roughly in the middle. This hole is only on the bottom side to get the rear baffle oriented correctly. The flange angles are not the same for upper and lower side. Use the same rivet as for the neighbor ones (AN426AD3-3.5). See this FB post for details. See also this VAF post for details. See also this VAF thread for details.