Tools needed to wire a Garmin panel: Difference between revisions
Jump to navigation
Jump to search
(Created page with "* DMC AFM8 Crimp Tool M22520/2-01 * K13-1 M22520/2-08 (Positioner for Male and Female normal density pins) * K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors) * Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc * Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red * Pin removal tool high density, e.g. Step N Go, M81969/1-04, green * Hex Allen Tool 3/32, at least 2 3/4 in...") |
(No difference)
|
Revision as of 16:26, 27 March 2022
- DMC AFM8 Crimp Tool M22520/2-01
- K13-1 M22520/2-08 (Positioner for Male and Female normal density pins)
- K42 M22520/2-09 (Positioner for Male high density pins, Garmin does not use Female high density pins on connectors)
- Stripping tool for 16-26 AWG, e.g. "Stripmaster" from Ideal Ind Inc
- Pin removal tool normal density, e.g. Aiconics USA, M81969/1-02, red
- Pin removal tool high density, e.g. Step N Go, M81969/1-04, green
- Hex Allen Tool 3/32, at least 2 3/4 inches long, e.g. in set of article 5709A38 at https://www.mcmaster.com/